_MATRIX原型继承方法使用说明
本帖最后由 zhengxb 于 2018-12-21 08:13 编辑1.28.2更新
1._MOVE方法增加this.type属性，默认为0应用为现有的程序，设置为1时应用于现有版本的安卓程序，只是显示隐藏按钮的方法有影响
2._MOVE方法增加this.getPos方法或取松手时的坐标值 var as = btnSourceMove.getPos(); sendLog("Pos",as+":"+as);as为数组；
/********************************************************************************************************************
1.设置矩阵按钮输入输出切换
2.设置移动按钮拖拉信号切换
3.按钮与拖拉切换状态同步
*********************************************************************************************************************
**********************************************以下为矩阵方法参数说明*************************************************
*********************************************************************************************************************
*********************************************************************************************************************
//四种方法定义矩阵设备,MOD为根据模版生成的COM或NET口
var dev_Matrix = new _MATRIX('MOD',9600,N,8,1);
var dev_Matrix = new _MATRIX('MOD',9600,N,8,1,fnMoveStatus,fnGetData);
var dev_Matrix = new _MATRIX('MOD');
var dev_Matrix = new _MATRIX('MOD',fnMoveStatus,fnGetData);
//fnGetData为数据返方法
//矩阵初使化，设置输入的Name，路数,输出Name，路数)
dev_Matrix.setInit('AV_IN_',16,'AV_OUT_',16);
输入按钮Name以AV_IN_为命名为AV_IN_1-AV_IN_16，输入按钮Name以AV_OUT_命名为AV_OUT_1至AV_OUT_16
function setMoveStatus(vInput,vOutput)
{
btnSourceMove.setStatus(vInput,vOutput); //拖动界面状态设置
}
//数据回调函数
function matrixReceive(vData)
{
sendLog("matrixReceive:",vData);
}
matrixReceive为前面定义的返回数据回调方法，vData为返回的数据，根据数据执行所需要的控制。
设置信号切换(输入,输出)
dev_Matrix.setSwitch(1,1)
延时设置信号切换(秒,输入,输出)
dev_Matrix.delaySwitch(1,2,3)
设置信号输入(输入)
dev_Matrix.setIn(1)
设置信号输出(输出)并切换矩阵
dev_Matrix.setOut(1)
设置矩阵控制命令格式，默认从数据库读取，也可以在程序中设置
dev_Matrix.command = "_IN_B_OUT_.";
程序会自动将_IN_替换为输入，将_OUT_替换为输出，如下格式2进3出为2B3.
端口发码：
dev_Matrix.setBaud(9600,N,8,1);
//发送代码(代码)
dev_Matrix.sendCodeString('code string')
//延时发送代码(秒，代码)
dev_Matrix.delayCodeString(1,'code string')
//发送代码(数据代码名称)
dev_Matrix.sendCodeName('code name')
//延时发送代码(秒，数据代码名称)
dev_Matrix.delayCodeName(1,'code name')
端口发码的主要目的是使用dev_Volume代替原有的sendCodeString(COM1,xxxxx)增加程序的可读性。
原型修改：
如果对于_MATRIX原型方法，需要修改或者需要增加，可使用如下方法：
修改方法：
delete dev_Matrix.setSwitch;
_MATRIX.prototype.setSwitch = function(sourcein,sourceout)
{
this.input = sourcein;
this.output = sourceout;
this.mstatus=this.input;
sendCodeString(this.port,this.input+"sss"+this.output);
//sendCodeString(this.port,this.getMatrixString(this.input,this.output));
this.setStatus();
this.fnMoveStatus(sourcein,sourceout);
}
在查看原型方法时存在，信号切换是调用数据库设置好的命令，可以删除原来的方法并重新构造，修改里面的相关参数，如上所示。
注：删除原型方法会使用所有调用原型的方法都改变，如果一个项目存在两台矩阵，都同时调用_MATRIX两个方法都会跟着改变。
如果一台需要改变，另一台不需要，则可使用直接增加方法2的方式，如下所示：
增加方法：
_MATRIX.prototype.setSwitch2 = function(sourcein,sourceout)
{
this.input = sourcein;
this.output = sourceout;
this.mstatus=this.input;
sendCodeString(this.port,this.input+"sss"+this.output);
//sendCodeString(this.port,this.getMatrixString(this.input,this.output));
this.setStatus();
this.fnMoveStatus(sourcein,sourceout);
}
*********************************************************************************************************************
******************************************以下为移动按钮方法参数说明*************************************************
*********************************************************************************************************************
//移动按钮定义及初始化，设置对应按钮Name及路数
var btnSourceMove = new _MOVE();
//移动按钮初始化(信号源按钮Name，信号源显示文字Name,信号源路数，显示屏范围Name，显示屏显示图标Name，显示屏显示文字Name，显示屏数量)
btnSourceMove.setInit('btnSource','txtSource',10,'lcdScope','lcdImage','lcdText','lcdTip',6);
//隐藏信号源1按钮(按钮Name1);
btnSourceMove.setSourceHide(1);
//显示信号源1按钮(按钮Name1);
btnSourceMove.setSourceShow(1);
//隐藏LCD1按钮(按钮Name1);
btnSourceMove.setLcdHide(1);
//显示LCD1按钮(按钮Name1);
btnSourceMove.setLcdShow(1);
//信号源恢复原位;
btnSourceMove.setPosinit();
//拖放命令，用于按钮的Button_Release，
function setSourceMove(vInput)
{
var vOutput = btnSourceMove.getLcd(vInput); //vInput为输入源，获取输出窗口对应输出路数
dev_Matrix.setSwitch(vInput,vOutput); //执行矩阵信号的输入对应输出切换
}
*******************************************************************************************************************/
附 _MATRIX与_MOVE原型方法，已封装在system.dat文件中，可直接调用。
function _MATRIX(vPort,vB,vN,vD,vS,fnMoveStatus,fnGetData)
{
this.modPrj = _SUBPROJECT_;
this.callButton = function(btnName)
{
CallObject(this.modPrj,btnName);
}
this.fnMoveStatus;
if(arguments.length>=2 && arguments.length<6)
{
this.fnMoveStatus= vB;
}
else if(arguments.length>=6)
{
this.fnMoveStatus= fnMoveStatus;
}
this.moveable = true;
this.input= 0;
this.output = 0;
this.properties = {};
this.inputmax = 16;
this.outputmax = 16;
this.btninputname = "AV_IN_";
this.btnoutputname = "AV_IN_";
this.imageinputon = new Array()
this.imageinputoff = new Array()
this.imageoutputon = new Array()
this.imageoutputoff = new Array()
this.imageon= "ImageOnStates.png";
this.imageoff = "ImageOffStates.png";
for (var i=1;i<=this.inputmax;i++)
{
if(FindGUIObject(this.btninputname+i)!=null)
{
this.imageinputon=getImageOn(this.btninputname+i)
this.imageinputoff=getImage(this.btninputname+i);
}
else
{
this.imageinputon = this.imageon;
this.imageinputoff = this.imageoff;
}
}
for (var i=1;i<=this.outputmax;i++)
{
if(FindGUIObject(this.btnoutputname+i)!=null)
{
this.imageoutputon=getImageOn(this.btnoutputname+i)
this.imageoutputoff=getImage(this.btnoutputname+i)
}
else
{
this.imageoutputon = this.imageon;
this.imageoutputoff = this.imageoff;
}
}
this.setInit = function(vinid,vinmax,voutid,voutmax)
{
this.btninputname = vinid;
this.btnoutputname = voutid;
this.inputmax = vinmax;
this.outputmax = voutmax;
for (var i=1;i<=this.inputmax;i++)
{
if(FindGUIObject(this.btninputname+i)!=null)
{
this.imageinputon=getImageOn(this.btninputname+i)
this.imageinputoff=getImage(this.btninputname+i);
}
else
{
this.imageinputon = this.imageon;
this.imageinputoff = this.imageoff;
}
}
for (var i=1;i<=this.outputmax;i++)
{
if(FindGUIObject(this.btnoutputname+i)!=null)
{
this.imageoutputon=getImageOn(this.btnoutputname+i)
this.imageoutputoff=getImage(this.btnoutputname+i)
}
else
{
this.imageoutputon = this.imageon;
this.imageoutputoff = this.imageoff;
}
}
}
this.mstatus = {};
this.command = GetControlCode("MATRIXCOMMAND");
this.commandin10 = GetControlCode("MATRIXCOMMANDIN>9");
this.commandout10 = GetControlCode("MATRIXCOMMANDOUT>9");
this.commandall10 = GetControlCode("MATRIXCOMMANDALL>9");
if(this.commandin10.length<9)
{
this.commandin10 = this.command
}
if(this.commandout10.length<9)
{
this.commandout10 = this.command
}
if(this.commandall10.length<9)
{
this.commandall10 = this.command
}
this.port = vPort
if(vPort.indexOf('MOD')!=-1)
{
this.port = GetCurrentIOName();
}
if(this.port.indexOf('COM')!=-1)
{
if(arguments.length>=5)
{
setComBaud(this.port,vB,vN,vD,vS);
}
}
this.setBaud = function(vsB,vsN,vsD,vsS)
{
setComBaud(this.port,vsB,vsN,vsD,vsS)
}
this.sendCodeString = function(vString)
{
sendCodeString(this.port,vString);
}
this.delayCodeString = function(vSec,vString)
{
delayCodeString(vSec,this.port,vString);
}
this.sendCodeName = function(vString)
{
sendCodeName(this.port,vString);
}
this.delayCodeName = function(vSec,vString)
{
delayCodeName(vSec,this.port,vString);
}
this.setIn = function(sourcein)
{
this.input = sourcein;
this.setStatus();
}
this.setOut = function(sourceout)
{
this.output = sourceout;
this.setSwitch(this.input,this.output)
}
this.setSwitch = function(sourcein,sourceout)
{
this.input = sourcein;
this.output = sourceout;
this.mstatus=this.input;
sendCodeString(this.port,this.getMatrixString(this.input,this.output));
this.setStatus();
this.fnMoveStatus(sourcein,sourceout);
}
this.delaySwitch = function(vsec,sourcein,sourceout)
{
this.input = sourcein;
this.output = sourceout;
this.mstatus=this.input;
delayCodeString(vsec,this.port,this.getMatrixString(this.input,this.output));
this.setStatus();
this.fnMoveStatus(sourcein,sourceout);
}
this.getMatrixString= function(vsetinput,vsetoutput)
{
var vStr = "";
if(vsetinput<10)
{
if(vsetoutput<10)
{
vStr = this.command;
}
else
{
vStr = this.commandout10;
}
}
else
{
if(vsetoutput<10)
{
vStr = this.commandin10;
}
else
{
vStr = this.commandall10;
}
}
vStr=vStr.replace(/_IN_/, vsetinput);
vStr=vStr.replace(/_OUT_/, vsetoutput);
return vStr
}
this.setStatus = function()
{
for (var i=1;i<=this.inputmax;i++)
{
if(FindGUIObject(this.btninputname+i)!=null)
{
this.properties={"ImagePic" : "images\\"+this.imageinputoff};
}
}
if(FindGUIObject(this.btninputname+this.input)!=null)
{
this.properties = {"ImagePic" : "images\\"+this.imageinputon};
}
for (var i=1;i<=this.outputmax;i++)
{
if(FindGUIObject(this.btnoutputname+i)!=null)
{
this.properties = {"ImagePic" : "images\\"+this.imageoutputoff};
}
}
for (var i=1;i<=this.outputmax;i++)
{
if(this.mstatus==this.input)
{
if(FindGUIObject(this.btnoutputname+i)!=null)
{
this.properties = {"ImagePic" : "images\\"+this.imageoutputon};
}
}
}
BatchChangeProperty(this.properties);
}
this.getRev = function(vData)
{
vN(vData);
}
this.getRev7 = function(vData)
{
fnGetData(vData);
}
if(arguments.length==3)
{
setStringReceive(this.port,this.getRev);
}
if(arguments.length==7)
{
setStringReceive(this.port,this.getRev7);
}
}
function _MOVE()
{
this.lcdin = new Array();
this.source = new Array();
this.lcd = new Array();
this.sourcemax = 10;
this.lcdmax = 6;
this.sourcebuttonname = 'btnSource';
this.sourcetextname = 'txtSource';
this.lcdsocpename = 'lcdScope';
this.lcdimagename = 'lcdImage';
this.lcdtextname = 'lcdText';
this.lcdtipname = 'lcdTip';
this.type = 0;
for (var i=1;i<= this.sourcemax ;i++)
{
this.source=new Object();
this.source.btnname = this.sourcebuttonname+i;
this.source.txtname = this.sourcetextname+i;
this.source.Visable = true
this.source.X = getPosX(this.sourcebuttonname+i);
this.source.Y = getPosY(this.sourcebuttonname+i);
this.source.txtX = getPosX(this.sourcetextname+i);
this.source.txtY = getPosY(this.sourcetextname+i);
this.source.Text = getText(this.sourcetextname+i);
this.source.Image = getImage(this.sourcebuttonname+i);
}
for (var i=1;i<= this.lcdmax ;i++)
{
this.lcd=new Object();
this.lcd.scopename = this.lcdsocpename+i;
this.lcd.imagename = this.lcdimagename+i;
this.lcd.txtname = this.lcdtextname+i;
this.lcd.tipname = this.lcdtipname+i;
this.lcd.Visable = true
this.lcd.X = getPosX(this.lcdsocpename+i);
this.lcd.Y = getPosY(this.lcdsocpename+i);
this.lcd.imageX = getPosX(this.lcdimagename+i);
this.lcd.imageY = getPosY(this.lcdimagename+i);
this.lcd.txtX = getPosX(this.lcdtextname+i);
this.lcd.txtY = getPosY(this.lcdtextname+i);
this.lcd.tipX = getPosX(this.lcdtipname+i);
this.lcd.tipY = getPosY(this.lcdtipname+i);
this.lcd.H = getHeight(this.lcdsocpename+i);
this.lcd.W = getWidth(this.lcdsocpename+i);
}
this.setSourceHide = function(vIndex)
{
if(this.type==1){
setAllPos(this.source.btnname,-1024,this.source.Y);
setAllPos(this.source.txtname,-1024,this.source.txtY);
}else{
setPos(this.source.btnname,-1024,this.source.Y);
setPos(this.source.txtname,-1024,this.source.txtY);
}
this.source.Visable = false;
}
this.setSourceShow = function(vIndex)
{
if(this.type==1){
setAllPos(this.source.btnname,this.source.X,this.source.Y);
setAllPos(this.source.txtname,this.source.txtX,this.source.txtY);
}else{
setPos(this.source.btnname,this.source.X,this.source.Y);
setPos(this.source.txtname,this.source.txtX,this.source.txtY);
}
this.source.Visable = true;
}
this.setLcdHide = function(vIndex)
{
if(this.type==1){
setAllPos(this.lcd.scopename,-1024,this.lcd.Y);
setAllPos(this.lcd.imagename,-1024,this.lcd.imageY);
setAllPos(this.lcd.txtname,-1024,this.lcd.txtY);
setAllPos(this.lcd.tipname,-1024,this.lcd.tipY);
}else{
setPos(this.lcd.scopename,-1024,this.lcd.Y);
setPos(this.lcd.imagename,-1024,this.lcd.imageY);
setPos(this.lcd.txtname,-1024,this.lcd.txtY);
setPos(this.lcd.tipname,-1024,this.lcd.tipY);
}
this.lcd.Visable = false;
}
this.setLcdShow = function(vIndex)
{
if(this.type==1){
setAllPos(this.lcd.scopename,this.lcd.X,this.lcd.Y);
setAllPos(this.lcd.imagename,this.lcd.imageX,this.lcd.imageY);
setAllPos(this.lcd.txtname,this.lcd.txtX,this.lcd.txtY);
setAllPos(this.lcd.tipname,this.lcd.tipX,this.lcd.tipY);
}else{
setPos(this.lcd.scopename,this.lcd.X,this.lcd.Y);
setPos(this.lcd.imagename,this.lcd.imageX,this.lcd.imageY);
setPos(this.lcd.txtname,this.lcd.txtX,this.lcd.txtY);
setPos(this.lcd.tipname,this.lcd.tipX,this.lcd.tipY);
}
this.lcd.Visable = true;
}
this.setInit = function(vsbtnname,vstxtname,bsmax,vlcdname,vlcdimagename,vlcdtxtname,vlcdtipname,vlcdmax)
{
this.sourcemax = bsmax;
this.lcdmax = vlcdmax;
this.sourcebuttonname = vsbtnname;
this.sourcetextname = vstxtname;
this.lcdsocpename = vlcdname;
this.lcdimagename = vlcdimagename;
this.lcdtextname = vlcdtxtname;
this.lcdtipname = vlcdtipname;
for (var i=1;i<= this.sourcemax ;i++)
{
this.source=new Object();
this.source.btnname = this.sourcebuttonname+i;
this.source.txtname = this.sourcetextname+i;
this.source.Visable = true
this.source.X = getPosX(this.sourcebuttonname+i);
this.source.Y = getPosY(this.sourcebuttonname+i);
this.source.txtX = getPosX(this.sourcetextname+i);
this.source.txtY = getPosY(this.sourcetextname+i);
this.source.Text = getText(this.sourcetextname+i);
this.source.Image = getImage(this.sourcebuttonname+i);
}
for (var i=1;i<= this.lcdmax ;i++)
{
this.lcd=new Object();
this.lcd.scopename = this.lcdsocpename+i;
this.lcd.imagename = this.lcdimagename+i;
this.lcd.txtname = this.lcdtextname+i;
this.lcd.tipname = this.lcdtipname+i;
this.lcd.Visable = true
this.lcd.X = getPosX(this.lcdsocpename+i);
this.lcd.Y = getPosY(this.lcdsocpename+i);
this.lcd.imageX = getPosX(this.lcdimagename+i);
this.lcd.imageY = getPosY(this.lcdimagename+i);
this.lcd.txtX = getPosX(this.lcdtextname+i);
this.lcd.txtY = getPosY(this.lcdtextname+i);
this.lcd.tipX = getPosX(this.lcdtipname+i);
this.lcd.tipY = getPosY(this.lcdtipname+i);
this.lcd.H = getHeight(this.lcdsocpename+i);
this.lcd.W = getWidth(this.lcdsocpename+i);
}
}
this.setPosinit = function()
{
for (var i=1;i<=this.sourcemax;i++)
{
if(this.source.Visable == true)
{
setButtonPox(this.sourcebuttonname+i,this.source.X,this.source.Y);
}
}
for (var i=1;i<=this.lcdmax;i++)
{
if(this.lcd.Visable == true)
{
setButtonPox(this.lcdimagename+i,this.lcd.imageX,this.lcd.imageY);
}
}
}
this.getLcd = function(vInput)
{
var as = ;
as = eval(GetPropertyJSON(FindGUIObject(self), 'Pos'));
for(var i=1;i<= this.lcdmax ;i++)
{
if(parseInt(as)>this.lcd.X && parseInt(as)<this.lcd.X+this.lcd.W && parseInt(as)>this.lcd.Y && parseInt(as)<this.lcd.Y+this.lcd.H)
{
setButtonText(this.lcdtextname+i,this.source.Text);
setButtonImage(this.lcdimagename+i,this.source.Image);
this.lcdin = vInput;
this.setPosinit();
return i
}
}
this.setPosinit();
return 0
}
this.getPos = function()
{
var as = ;
as = eval(GetPropertyJSON(FindGUIObject(self), 'Pos'));
this.setPosinit();
return as
}
this.setStatus = function(vInput,vOutput)
{
setButtonText(this.lcdtextname+vOutput,this.source.Text);
setButtonImage(this.lcdimagename+vOutput,this.source.Image);
this.lcdin = vInput;
}
}
页:
[1]